VANCOUVER, BC, March 11, 2021- Rockridge Resources Ltd. (TSXV: ROCK) (OTCQB: RRRLF) (Frankfurt: RR0) ("Rockridge" or the "Company") is pleased to announce it has completed its geophysical program at its flagship Knife Lake Project located in Saskatchewan, Canada (the "Knife Lake Project" or "Property"). The Company also announces its plans for an upcoming 1,600 metres minimum drill program. Rockridge has an Option Agreement with Eagle Plains Resources Ltd. to acquire a 100% interest in the Property that covers the Knife Lake Cu-Zn-Ag-Co VMS deposit. The contiguous claims total 32,663 hectares and are located approximately 50 km northwest of Sandy Bay, Saskatchewan. A 357kV powerline runs within 16 km of the Knife Lake Deposit area, greatly enhancing the project's infrastructure.
Knife Lake VMS Project Map:
https://www.rockridgeresourcesltd.com/_resources/projects/KnifeLake-Fig3.jpg
Winter Geophysical Program:
Crews have now completed an airborne electromagnetic (EM) and horizontal magnetic gradiometer geophysical survey at the Knife Lake Project using Geotech Ltd.'s VTEMTM Plus system. The survey was strategically located over the Scimitar and Gilbert Lake targets to investigate over 30 linear kilometers of prospective VMS stratigraphy which hosts the Knife Lake copper deposit.
Airborne Geophysical Results:
http://www.rockridgeresourcesltd.com/_resources/images/Airborne-EM-results-03-10-2021.jpg
Preliminary data from the survey has revealed several conductive features of significant interest, eight conductors have been prioritized for geophysical modeling based on their correlation with prospective stratigraphy and favorable geochemistry. These geophysical models will assist in targeting holes for the upcoming drill program.
2021 Regional Exploration Program and Priority Target Areas:
http://www.rockridgeresourcesltd.com/_resources/images/Knife-Lake-Airborne-EM-Feb2021.jpg
The Knife Lake deposit contains typical VMS mineralogy which has been significantly modified and partially remobilized during the emplacement of granitic rocks. Therefore, the known deposit may represent a remobilized portion of a presumably larger "primary" VMS deposit based on general observations about the mineralogy, mineral textures and metal ratios in the deposit. Most of the historical work has consisted of shallow drilling at the deposit area with little regional work carried out and limited deeper drilling below the deposit. As a result, there is strong discovery potential both at depth and regionally.
Upcoming Knife Lake Drill Program:
Rockridge has recently commenced the mobilization of crew and equipment to complete a minimum of 1,600 metres diamond drill program consisting of 6-8 holes. Drilling will focus on discovering VMS style copper deposits along newly defined conductors and at depth, underneath the Knife Lake deposit. Infill drilling is also planned in the immediate area of the 2019 maiden resource. Downhole geophysics, borehole electromagnetics (BHEM), will be utilized extensively throughout the program.
Knife Lake Geology and History:
The Knife Lake Project is interpreted to be a remobilized VMS deposit. The stratabound mineralized zone is approximately 15m thick and contains copper, silver, zinc, gold and cobalt mineralization which dips 30° to 50° eastward over a known strike-length within Rockridge's claim area of 3,700 metres, and a known average down-dip extension of approximately 300 metres.
Knife Lake Deposit Map:
https://www.rockridgeresourcesltd.com/_resources/projects/KnifeLake-Fig2.jpg
The deposit is hosted by felsic to intermediate volcanic and volcaniclastic rocks which have been metamorphosed to upper amphibolite facies. The deposit contains VMS mineralogy which has been significantly modified and partially remobilized during the emplacement of granitic rocks. The mineralization straddles the boundary between two rock units and occurs on both limbs of an interpreted overturned fold.
The Company completed twelve holes consisting of 1,053 metres of diamond drilling in the 2019 winter drilling program. This represented the first drilling on the property since 2001 and had two primary objectives: confirm the tenor of mineralization reported by previous operators and expand known zones of mineralization. Highlights from the drill program included previously reported hole KF19003 which intersected net-textured to semi-massive sulphide mineralization from 11.2m to 48.8m downhole. This 37.6 metre interval returned 2.03% Cu, 0.19 g/t Au, 9.88 g/t Ag, 0.36% Zn, and 0.01% Co for an estimated 2.42% CuEq. Additionally, previously reported drill hole KF19001 intersected net-textured to fracture-controlled sulphide mineralization from 7.5 metres to 40.6 metres downhole. This 33.1 metre interval returned 1.28% Cu, 0.12 g/t Au, 4.80 g/t Ag, 0.13% Zn, and 0.01% Co for an estimated 1.49% CuEq.
Knife Lake Plan Map and Drill Collar Locations:
http://www.rockridgeresourcesltd.com/_resources/maps/KN-2019-DDH-Location-20190808.pdf
Compilation and initial modelling indicate potential for expansion of the deposit at depth. The recent drilling focused on resource upgrade as well as infill drilling between historical holes. The program gave the Company's technical team valuable insights into the property geology, alteration, and mineralization that will be applied to future regional exploration on the highly prospective and underexplored land package.
The Knife Lake deposit is a near surface VMS deposit starting a few metres below surface and the deposit remains open at depth and along strike for potential resource expansion. Recently Rockridge announced a maiden NI 43-101 resource estimate for the Knife Lake deposit (see the News Release dated August 14th, 2019) which consisted of an indicated resource of 3.8 million tonnes at 1.02% CuEq at a 0.4% CuEq cut-off (3.8 MT at 0.83% Cu, 3.7 gpt Ag, 0.097 gpt Au, 82 ppm Co, 1740.7 ppm Zn). In addition there is an inferred resource of 7.9 million tonnes at 0.67% CuEq at a 0.4% CuEq cut-off (7.9 MT at 0.53% Cu, 2.4 gpt Ag, 0.084 gpt Au, 53.1 ppm Co, 1454.9 ppm Zn). Refer to the NI 43-101 Technical Report on the Mineral Resource Estimate for the Knife Lake Property, Saskatchewan dated September 27, 2019 filed on Sedar.
Qualified Persons:
Kerry Bates, P. Geo., a "qualified person" for the purposes of National Instrument 43-101 - Standards of Disclosure for Mineral Projects, and a Geologist employed by TerraLogic Exploration Inc., has reviewed and approved the scientific and technical disclosure in this news release relating the Knife Lake Project
Todd Keast, P.Geo., a "qualified person" for the purposes of National Instrument 43-101 - Standards of Disclosure for Mineral Projects, and the Raney Gold Project Manager for Rockridge Resources Ltd., has reviewed and approved the scientific and technical disclosure in this news release relating to the Raney Gold Project.
About Rockridge Resources Ltd.
Rockridge Resources is a publicly traded mineral exploration company focused on the acquisition, exploration, and development of mineral resource properties in Canada and other mining-friendly jurisdictions. The Company's Knife Lake Project is in Saskatchewan, which is ranked as one of the top mining jurisdictions in the world by the Fraser Institute. The project hosts the Knife Lake deposit, which is a VMS, near-surface copper-cobalt-gold-silver-zinc deposit open along strike and at depth. The Company's Raney Gold Project is a high-grade gold exploration project located in the same greenstone belt that hosts the world-class Timmins and Kirkland Lake lode gold mining camps. Rockridge's goal is to maximize shareholder value through new mineral discoveries, committed long-term partnerships, and the advancement of exploration projects in geopolitically favourable jurisdictions.
Additional information about Rockridge Resources and its project portfolio can be found on the Company's website at www.rockridgeresourcesltd.com.
Rockridge Resources Ltd.
"Grant Ewing"
Grant Ewing
CEO
For further information contact myself or:
Jordan Trimble, President or
Spencer Coulter, Corporate Communications
Rockridge Resources Ltd.
Telephone: 604-687-3376
Toll Free: 800-567-8181
Facsimile: 604-687-3119
Email: info@rockridgeresourcesltd.com
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THE CONTENT OF THIS NEWS RELEASE.
Forward Looking Information
This release includes certain statements that may be deemed to be "forward-looking statements". All statements in this release, other than statements of historical facts, that address events or developments that management of the Company expects, are forward-looking statements. Statements included in this announcement, including statements concerning our plans, intentions and expectations, which are not historical in nature are intended to be, and are hereby identified as, "forward-looking statements". Forward-looking statements may be identified by words including "anticipates", "believes", "intends", "estimates", "expects" and similar expressions. Although management believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance, and actual results or developments may differ materially from those in the forward-looking statements. The Company undertakes no obligation to update these forward-looking statements if management's beliefs, estimates or opinions, or other factors, should change. Factors that could cause actual results to differ materially from those in forward-looking statements, include market prices, exploration and development successes, continued availability of capital and financing, and general economic, market or business conditions. Please see the public filings of the Company at www.sedar.com for further information.
SOURCE Rockridge Resources Ltd.
